Description
This Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Neo 6 series modules. This Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings. Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems. This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass.
Note:
- APM 2.5 and APM 2.0 have an internal compass (unlike APM 2.6) which must be disabled by cutting a trace before you can connect the 3DR GPS + Compass module
- Other than disabling the internal compass, connecting the is the same for APM2.0/APM2.5 as for APM2.6.
Features :
- Locate performance
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) Changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) Changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 6 pin connector for EZ connect to MEGA BLACK
- 4 pin connector for only GPS use
- 4 pin connector for compass only use
- Can use both 4 pin at once.
Specifications:
Model | Ublox NEO 7M |
Receiver Type | 56 Channels Galileo E1B/C1 GPS L1C/A QZSS L1C/A SBAS L1C/A |
Receiver Frequency | L1 [1575.42MHz] |
Input Supply Voltage (VDC) | 3.5 ~ 5.5 |
Main Chip | U-BLOX NEO-7M |
Sensitivity (dBm) | -155 -160 Cold Start (without aiding): -147 dBm Tracking & Navigation: -161 dBm |
Position Accuracy (Meter) | 2 2.5 |
Acceleration (g) | <4 |
Navigation Update Rate | 5Hz |
Operating Temperature Range (°C) | -24 to 84 |
Tracking Sensitivity (dBm) | -161 dBm |
Co-Ordinate System | WGS-84 |
Capture Time | 0.1s Average |
Avg Cold Start Time (s) | 38 |
Warm Start Time (s) | 35 |
Boot Time | 1S |
Maximum Altitude (m) | 18000 |
Maximum Speed | 515 m/s |
*Product images are shown for illustrative purposes only and may differ from actual product.